Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sorry guys i should have been a bit more specific. Yes the internet rumors do bother me, the loose jackshaft and air bubbles and all that, but I've already found things wrong on my sled. The lower intake frogzskins peeling from the factory, almost no chaincase oil oil in the sled, loose nut on the clutch fan, my bumper creaks loudly when i pick up on it, putting gas in the little filler neck thats too close to the steering post with a 5 gallon pos new epa friendly gas jug is a 2 man job, and pouring oil in is fun too... I knew i was going to get flamed for this post, but about everyone else is b1tchin so i thought it was my turn .
Come ride, and you'll forget about the "issues"
I'm serious about the A arms though. (or call Alpine in Kremmling, or Power world in granby to see if they've got any in stock)
When you break something it's gonna suck to not have spares.(and you can't have ours!!!)
I am now starting to know how polaris 900 owners felt, except not to that extent. Cat you really dropped the ball on these sleds, All these idiotic issues caused by laziness, lack of testing, some window lickers in the production lines, poor design, and a few dealers not doing their jobs. Im going on my first ride in Walden, Co this weekend and I'm not worried if, I'm worried about which of the pro climb issues is going to show up on my sled. This should not be a problem on $12k sled! I am a die hard cat fan and can't believe I'm admitting this, but I think i should have bought a pro
I sorta feel the same way, except that I absoutely love my sled.
All of the issues you have run into, and that I have run into are not ride stopping problems, hell, I've already put 40 miles on mine. I had a loose screw, a crossed screw, crappy fitting hood, initially screwy reverse, and a poorly fitting crankcase breather tube elbow. I've managed to fix them all myself so far by tightening the screw, retapping the screw hole, spending two hours screwing around with the hood, being patient with the reverse, and replacing the elbow with one from Menards that I wrapped one side with electrical tape before using.
These things I ran into aren't internet rumors, they are actual things I had to deal with.
I've heard nothing from the dealer or from Arctic Cat about any of these issues, which is probably the most angering part. As far as I can tell, the factory isn't interested in addressing these problems. I'm sure they probably are, but I have nothing that would tell me that.
Oh, that reminds me, I still have a coolant hose near the clutch that has a bolt digging into the side of it a good 1cm that I need to deal with.
.
I also personally know 2 people that have blown the new cat, and I'll gladly let people know about that as well.
See this is what is bugging me the most! All of the little stuff that should not be there!
my xp is perfect
Uuhm, need I say it but again because you just did. LITTLE, i mean little stuff, and you brought the poo 900 into this.
Some people on here need to give their head a shake.
When you buy a brand new sled, the first thing to do is check over the PDI stuff that the dealer did and check the rest of the sled over. I agree that it should be put together properly by the dealer, but ultimately it's YOUR sled and YOU are the one that will be left on the trial when something happens. Do you really want to rely on someone else for that?
Second thing is to mix the first tank of oil. This is pretty standard procedure, and always has been. If you didn't do this, and blow up the sled, it's unacceptable. Anyone who has any sled experience should know this.
As far as belts, I can understand maybe having belt issues for the first run. Pulling in powder? Sure, can be a problem. BUT, if you pop a belt in 50 miles, then deal with the problem instead of going through multiple belts like an idiot. Apply vents where necessary. Align the clutches. Pull them apart and check for proper operation. There's no magic behind this. Clutches do not eat belts in less than 100 miles unless you have an underlying issue that needs to be dealt with.
It laughable that people are so quick to blame a new model for these problems. Everything listed above are not brand specific issues, and they're certainly not problems that just popped up in 2012.
See this is what is bugging me the most! All of the little stuff that should not be there!
See this is what is bugging me the most! All of the little stuff that should not be there!
Your right in saying we need to do the PDI stuff, but we damm sure shouldn't have to. I sure as hell don't when i get a new vehicle! I agree with everything else, i mixed up my gas and filled her up tonight. Mixed it 80:1 just to be safe.