Many have asked how to change there track. This is how i did it on my 09 XF8.
1. Take your belt off. Take your bolt out of the secondary, flip around the belt adjuster and tighten your bolt again, this will spread the secondary enough to take the belt off.
2. Take the belt guard off the foot well. This will allow the DD to slide out.
3. Take out the 1/2" /13mm lock nuts off the DD case. 8 of them
4. Now its time to loosen the track. take a 9/16 wrench and loosen the jam nut.
5. Loosen the long 9/16 bolt a ways back so the rear idler wheels can slide forward to make more room.
6. Take a small screw drive and pop off the little black cover to access the bolt that holds the rear idler wheels. take 2 9/16 sockets and loosen the bolts.
7. I used a come along to lift the rear end of the sled.
8. Now take the spring slide off and reposition the spring so it is off the triangle. this will relax the rear suspension so its easy to take out the skid bolts. (CAUTION: SPRING WILL HAVE TENTION, CARE MUST BE TAKEN)
9. Now take out the rear suspension bolts. 9/16"
10. now take out the front bolts, there is lock nuts on the inside. 9/16"
11. now slide the skid frame out of the track.
1. Take your belt off. Take your bolt out of the secondary, flip around the belt adjuster and tighten your bolt again, this will spread the secondary enough to take the belt off.
2. Take the belt guard off the foot well. This will allow the DD to slide out.
3. Take out the 1/2" /13mm lock nuts off the DD case. 8 of them
4. Now its time to loosen the track. take a 9/16 wrench and loosen the jam nut.
5. Loosen the long 9/16 bolt a ways back so the rear idler wheels can slide forward to make more room.
6. Take a small screw drive and pop off the little black cover to access the bolt that holds the rear idler wheels. take 2 9/16 sockets and loosen the bolts.
7. I used a come along to lift the rear end of the sled.
8. Now take the spring slide off and reposition the spring so it is off the triangle. this will relax the rear suspension so its easy to take out the skid bolts. (CAUTION: SPRING WILL HAVE TENTION, CARE MUST BE TAKEN)
9. Now take out the rear suspension bolts. 9/16"
10. now take out the front bolts, there is lock nuts on the inside. 9/16"
11. now slide the skid frame out of the track.