I was going to change out my oil tank on my M8 due to the heat/warping problem everyone has experienced on the M series sleds.
Just prior to changing, some one on snowest mentioned a sleeve which is made by DAN03REV. I decided to give it a try, and ordered it monday.Recieved it thursday,and took about 5 minutes to install using a heat gun to warm up the neck, installed easy and now the cap sets on correct and seals good. Its an easy fix for about $15.00 . Sorry I cant download a photo.
If you have this problem send dan an email at DAN_03REV@yahoo.com
Hope this helps any one with this problem. RickM
Just prior to changing, some one on snowest mentioned a sleeve which is made by DAN03REV. I decided to give it a try, and ordered it monday.Recieved it thursday,and took about 5 minutes to install using a heat gun to warm up the neck, installed easy and now the cap sets on correct and seals good. Its an easy fix for about $15.00 . Sorry I cant download a photo.
If you have this problem send dan an email at DAN_03REV@yahoo.com
Hope this helps any one with this problem. RickM
Last edited: