Is there anyway to adjust the clutch alignment on the xp summit 800s mine don't look straight at all. Didn't know if this would help my belt issues. Help
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
For best results - get the conversion done to float the secondary.
Is the square bar long enough to go down to the primary? You want it in the center of both or not. Or is the edge of one closer or line up with the other.
Aren't the secondarys pressed on where do you had the shims? Middle of my secondary is just about to the inside edge of my primary. I don't know if shims will take up that much will it? And how far will the motot move around if you move it? Thanks for the posts keep um comin I'll get this figured somehow.
We make shims kits to align the clutches, keeps belt heat down. The shims go behind the sec clutch bearing and one for the chaincase side as well. they are in .040" increments. We supplied the Captain with his.
$60 kit is inepensive compared to changing the whole jackshaft.
http://www.terraalpsracing.com/product/clutch-kits