Hey guys I folded another lower aarm.. so instead of spending the 350$ for a assault aarm I was wondering with the Zbros 43'' aarm set, do I need to change anything? Every other kit I looked at says the shocks wont fit.. shouldnt be hard to swap the bushings and balljoints. Any one have any words of wisdom? Or pics? - thanks Clayton.
Zbros aarms
- Thread starter cbc24
- Start date
I have a couple of 43"ers (maybe they are 45's or wider, I should go measure them, bought the sled used so really don't know for certain) and they use the IQR shock length, about an inch longer than the Assault length from memory.
Last edited:
I had the 43" Z-broz on my 2011 PRO with stock 2011 Assault shocks and they bolted right up. Should be that simple.
From what I've been told by Nate and Ryan, the 43" (SKU K71-0601-1) are a direct replacement for Assaults using stock shocks.
.
.
J
here is another brand people have recommended to me. They don't state if a different shocks is needed or not but they are the same price.
http://www.alternativeimpact.com/polaris cro-moly a-arms.htm
http://www.alternativeimpact.com/polaris cro-moly a-arms.htm
N
I just put the zbroz on my assault, they bolt right up. Change the ball joints and put on the new tie rods. 2 hour project tops.
Similar threads
