• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Yamachromoly

mx100

Active member
Lifetime Membership
Jun 16, 2010
234
29
28
Livingston, MT.
Working on a picture. I have a photobucket account, but I cannot get it to copy over.
 
Last edited:

mx100

Active member
Lifetime Membership
Jun 16, 2010
234
29
28
Livingston, MT.
Mic's new ride!

photobucket-964-1324440669295.jpg
 

mx100

Active member
Lifetime Membership
Jun 16, 2010
234
29
28
Livingston, MT.
Ski-Dooin it, the right way!!!

photobucket-964-1324440669295.jpg


Sorry for so many posts. Took me a while to figure out how to get a picture on here. Here you go Nick!
 
Last edited:

Wheel House Motorsports

Well-known member
Lifetime Membership
Nov 27, 2007
29,933
5,971
113
34
SW MT
its got a lot more covering on it then in that picture already, the nose is all skinned over and more around the seat, still working on my final choice for a tank seat situation, so that is still very temporary. also, working on a way to stuff the propane mixer down a little lower to clean the whole area behind the bars up a bit.

as for the weight, there is a reason there is a strap on the back!!! she comes in at right around 550 ready to ride with a steel tank. not bad for a turbo 162 and a 1 ton motor!! also a stock rt skid and rt chaincase which are not the lightest parts on the planet.

thanks for the pix jim!
 

Wheel House Motorsports

Well-known member
Lifetime Membership
Nov 27, 2007
29,933
5,971
113
34
SW MT
i was boosting into the trailer, the concrete right outside the door isnt polished and the skags always grab it.. makes it spin bad.


rode it again today, its stupid fast. got an electrical issue causing it to randomly backfire and it blows my intake manifold off.. not very fun. but at 12# of boost in the snow we have right now suspension would be my limiting factor far before power.
 

sledfvr

Well-known member
Lifetime Membership
Apr 7, 2008
1,049
436
83
NW MT
It does look really lite. Congrats! Can't believe there's a yammi motor stuffed in that little space.
 

Wheel House Motorsports

Well-known member
Lifetime Membership
Nov 27, 2007
29,933
5,971
113
34
SW MT
Can't believe there's a yammi motor stuffed in that little space.

the funny part is half of the thing is empty inside, my motor is all stuffed in the back. tried to make the thing as compact as possible.. currently working on rerouting my charge tube/mixer/throttle body so its all tucked inside the pyramid and i can cover it more.
 
Premium Features