I am selling my 2006 IQR Mountain Sled...
Based off 2006 IQR bulkhead (never raced)...Front to Back...
SLP powder pro's with Carls Mod<-5 years old
Dragon A-arms, radius rods, spindles, Float 2<-5 rides
Front fenders<-stock 2006
Side Pannels<-New with Brads vents (in the process of installing)
BRTech Thrasher hood with vents <-three rides
Struthers 910 complete rebuild from crank up w/ wide bearing kit from their guy back in Minn. New studs, pistons, honned cyls, old style head with relief cuts so no cracks! V-force III with new pettles, 42mm Polaris carbs with new float assemblies, Brad's carb adapters, modified stock airbox, SLP twins fit to clear hood and fit for front dump, Modified ECU with ER and new stock ECU with ER (yes 2 ECU's), Oil Injection, Brads Plate with SLP Base Plate (yes it's over-kill but I like it), Bulkhead clearanced and welded by professional. I am running my air intake just as a stock racer would. I have headlight intakes and upper hood and tach intakes for air.<-7 Rides
P-85 Primary with Carls setup (round almond and belly busters)<-7 rides
Team Driven with Carls setup (red black, don't remember helix but it is ER)<-7 rides on rebuild
Controls: RSI 3 inch riser, Pro Taper Evo, Racer break and Throttle block, Racer on/off switch, Dragon reverse button.
KOSO Revolution G2 tach/Water temp/etc.
8 Gallon IQR tank, Bad Oscar Customs Seat (1 of 2 ever made)
2006 IQR tunnel w/ Van Amberg extension w/bumper, Meathookers Feethookers<-7 rides
Full Length Holz U-cooler
Holz/Float rear skid w/ universal rail extension and 2 wheel kit/scratchers<-from my old Edge. Placement of rear skid based on Mark Holz builds, obtained from Carls
Whal Bros Extrovert Drivers/2.14 Gearing/Polaris 166x2.4x15 Track/Ported from my old Edge
Dragon snow flap<-1 ride
Cover <- 3 Trips
2- 2.5 gallon gas cans and HRP gas Rack <-7 Rides
This sled rips! It is very fun to ride and goes through the snow very well. I don't have to sell my sled, but the extra coin would help.
I am asking $7500.00 for it. I'm realistic, it's not brand new and my name is not Winter, Holz, Struthers, or Brad, and the 2011's are coming out.
Thanks for Looking!!!
Based off 2006 IQR bulkhead (never raced)...Front to Back...
SLP powder pro's with Carls Mod<-5 years old
Dragon A-arms, radius rods, spindles, Float 2<-5 rides
Front fenders<-stock 2006
Side Pannels<-New with Brads vents (in the process of installing)
BRTech Thrasher hood with vents <-three rides
Struthers 910 complete rebuild from crank up w/ wide bearing kit from their guy back in Minn. New studs, pistons, honned cyls, old style head with relief cuts so no cracks! V-force III with new pettles, 42mm Polaris carbs with new float assemblies, Brad's carb adapters, modified stock airbox, SLP twins fit to clear hood and fit for front dump, Modified ECU with ER and new stock ECU with ER (yes 2 ECU's), Oil Injection, Brads Plate with SLP Base Plate (yes it's over-kill but I like it), Bulkhead clearanced and welded by professional. I am running my air intake just as a stock racer would. I have headlight intakes and upper hood and tach intakes for air.<-7 Rides
P-85 Primary with Carls setup (round almond and belly busters)<-7 rides
Team Driven with Carls setup (red black, don't remember helix but it is ER)<-7 rides on rebuild
Controls: RSI 3 inch riser, Pro Taper Evo, Racer break and Throttle block, Racer on/off switch, Dragon reverse button.
KOSO Revolution G2 tach/Water temp/etc.
8 Gallon IQR tank, Bad Oscar Customs Seat (1 of 2 ever made)
2006 IQR tunnel w/ Van Amberg extension w/bumper, Meathookers Feethookers<-7 rides
Full Length Holz U-cooler
Holz/Float rear skid w/ universal rail extension and 2 wheel kit/scratchers<-from my old Edge. Placement of rear skid based on Mark Holz builds, obtained from Carls
Whal Bros Extrovert Drivers/2.14 Gearing/Polaris 166x2.4x15 Track/Ported from my old Edge
Dragon snow flap<-1 ride
Cover <- 3 Trips
2- 2.5 gallon gas cans and HRP gas Rack <-7 Rides
This sled rips! It is very fun to ride and goes through the snow very well. I don't have to sell my sled, but the extra coin would help.
I am asking $7500.00 for it. I'm realistic, it's not brand new and my name is not Winter, Holz, Struthers, or Brad, and the 2011's are coming out.
Thanks for Looking!!!
Last edited: