Hi Guys
Some of you may know me from over on the Yamaha side. I'm the inventor of the tether controlled roll-over valve for 4 stroke engines and have been making roll-over valve kits for Yamahas for the past few years.
After receiving several inquiries about a ROV kit for the M1100, I decided to start building roll-over valve kits for the M1100 as well!
The Proclimb M1100 ROV kits have all the same features as the Yamaha kits including,
Tether switch shuts the engine down and closes the shut-off valve, which is attached to the breather hose at the air filter. This helps prevent engine oil from leaking out into the air filter during a roll-over. Oil loss on four strokes makes a mess and in some cases can cause the oil to leak on to clutches/belt.
Plug and play to the sled's wiring harness. No cutting/splicing into the factory wiring harness.
Shut-off valve is a normally open valve. Defaults to open if the system looses power for added safety.
Red LED indicator light flashes anytime the valve is closed/powered on.
Gen 3 kit, can be used with or without our electronic roll-over valve control module.
Electronic roll-over valve control module or ROVCM features pulse width modulation output and offers the fastest possible valve closing speed, reduced current draw and battery voltage monitoring/auto shut-down!
US Patent number 8,225,766
Links
http://fourstrokesolutionsllc.webs.com/kitforarcticcatm1100.htm
http://fourstrokesolutionsllc.webs.com/rollovervalvefeatures.htm
http://fourstrokesolutionsllc.webs.com/apps/photos/album?albumid=12901088
http://fourstrokesolutionsllc.webs.com/highperformancerovcm.htm
Bill
Some of you may know me from over on the Yamaha side. I'm the inventor of the tether controlled roll-over valve for 4 stroke engines and have been making roll-over valve kits for Yamahas for the past few years.
After receiving several inquiries about a ROV kit for the M1100, I decided to start building roll-over valve kits for the M1100 as well!
The Proclimb M1100 ROV kits have all the same features as the Yamaha kits including,
Tether switch shuts the engine down and closes the shut-off valve, which is attached to the breather hose at the air filter. This helps prevent engine oil from leaking out into the air filter during a roll-over. Oil loss on four strokes makes a mess and in some cases can cause the oil to leak on to clutches/belt.
Plug and play to the sled's wiring harness. No cutting/splicing into the factory wiring harness.
Shut-off valve is a normally open valve. Defaults to open if the system looses power for added safety.
Red LED indicator light flashes anytime the valve is closed/powered on.
Gen 3 kit, can be used with or without our electronic roll-over valve control module.
Electronic roll-over valve control module or ROVCM features pulse width modulation output and offers the fastest possible valve closing speed, reduced current draw and battery voltage monitoring/auto shut-down!
US Patent number 8,225,766
Links
http://fourstrokesolutionsllc.webs.com/kitforarcticcatm1100.htm
http://fourstrokesolutionsllc.webs.com/rollovervalvefeatures.htm
http://fourstrokesolutionsllc.webs.com/apps/photos/album?albumid=12901088
http://fourstrokesolutionsllc.webs.com/highperformancerovcm.htm
Bill
Last edited: