Pro RMK driveshaft on an Axys?

[richracer1]

how about proride chaincase shaft to axys chaincase drive or vice versa

The only difference between those two specific drive shafts is how they bolt up on the PTO side. The Axys shafts use bolts that go into the bearing plate while the Pro-Ride shafts have studs on the bearing plate.

 

[polarisperformance]

Track was to tight in the tunnel or to tight against the rear wheels?

too tight at the rear wheels,

 

[xmk1080]

too tight at the rear wheels,

I did it to my 163 and a friend did it to his 155, they are both tighter but do clear.

 

[ak]

Question For anybody that's installed a pro drive shaft with 8 tooth stock drivers, is the track more centered in the tunnel now?

Did Polaris fix the off to oneside track problem on the 17 models?

 

[xmk1080]

Question For anybody that's installed a pro drive shaft with 8 tooth stock drivers, is the track more centered in the tunnel now?

Did Polaris fix the off to oneside track problem on the 17 models?

My 16 axys rmk is centered with the pro drivers but it was also centered with the stock drivers. More that likely some of drivers got pressed on wrong from factory.

 

[Sage Crusher]

Question For anybody that's installed a pro drive shaft with 8 tooth stock drivers, is the track more centered in the tunnel now?

Did Polaris fix the off to oneside track problem on the 17 models?

We never had any issues with the stock drivers on any of our 17 Axys