Update for 0-3000ft elevation tuning:
ZRP Tailstander 85G base weight:
Added 2G to each hole initially (total 6g added) and was hitting 8100-8200 RPM on spring snow. Added 1G to tip hole (total 7G added to a total of 92G) to drop RPM a bit, now hitting between 8000-8100 RPM in a bit deeper spring snow. Going to add 1G more to tip to get between 7900-8000 RPM hopefully.
Initial impressions seem to be good, no overly crazy improvement, but the clutches do seem to be a bit cooler and slightly better throttle response and RPM consistency. Time will tell if my belt will last longer than 300 miles. Still stock secondary.
ZRP Tailstander 85G base weight:
Added 2G to each hole initially (total 6g added) and was hitting 8100-8200 RPM on spring snow. Added 1G to tip hole (total 7G added to a total of 92G) to drop RPM a bit, now hitting between 8000-8100 RPM in a bit deeper spring snow. Going to add 1G more to tip to get between 7900-8000 RPM hopefully.
Initial impressions seem to be good, no overly crazy improvement, but the clutches do seem to be a bit cooler and slightly better throttle response and RPM consistency. Time will tell if my belt will last longer than 300 miles. Still stock secondary.