M
3,200 miles
Fresh top end
Slp cheater head
Slp pipe and can
Reeds clean and inspected
TPS set
Sled has fouled plugs it’s whole life, even does now and I’m running 92 eth, bpr8es plugs on the non-eth setting.
If it were carbureted I’d drop a pilot size, lean the clip one and turn the fuel screw in a touch but obviously that is not an option.
Is there any fix to this?
Going to crank my idle screw up a little to see if that helps since it idles low(1,500) I’d like it at 1,800.
It also really eats oil.
Fresh top end
Slp cheater head
Slp pipe and can
Reeds clean and inspected
TPS set
Sled has fouled plugs it’s whole life, even does now and I’m running 92 eth, bpr8es plugs on the non-eth setting.
If it were carbureted I’d drop a pilot size, lean the clip one and turn the fuel screw in a touch but obviously that is not an option.
Is there any fix to this?
Going to crank my idle screw up a little to see if that helps since it idles low(1,500) I’d like it at 1,800.
It also really eats oil.
