• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

2008 Yamaha Nytro MCX Turbo 162"

Z
Jan 12, 2010
19
4
3
I am selling my 2008 Yamaha Nytro MTX. Sled has 1370 miles, 1000 has been on boost. Running the mcxpress 290hp turbo kit. The Sled runs excellent, been running it around 17-18lbs of boost. Has full timber sled rear suspension, Camo Extreme 2.5" track with only one season of riding on it, avid drivers, skid plate, and big ol front bumper. This sled just rocks, have not had any issues with it at all. Im just looking to try a diffrrent sled out for this next winter.

Im Asking 14,000obo, offers are welcome. Sled is located in Rapid City SD, I am willing to drive a little ways to deliver. I do travel a lot to Bozeman MT, so bringing the sled up in that area would not be a problem!

Here is a little vid of the sled. Enjoy!

http://www.youtube.com/watch?v=3tx35oswSAo

IMAG0128.jpg IMAG0131.jpg IMAG0129.jpg IMAG0133.jpg IMAG0135.jpg IMAG0125.jpg
 
Z
Jan 12, 2010
19
4
3
I usually run little more than 50/50, unless if im planning on doing some long hard pulls up the hill, then ill mix more race into it.
 
W

whittaker727

Well-known member
Nov 26, 2007
3,902
285
83
Naples, Id
For the 290 hp you must have the 19T turbo on it? I thought the stage II kit was good for 270 with the stock 16T that comes with the kit. Great price by the way.
 
Z
Jan 12, 2010
19
4
3
Thank you for bringing that up whittaker, i was wrong on the kit, for some reason i had stuck in my mind it was a 290, but i knew it still had the 16t. so i went n looked it up,. Its actualy just the 240, but i am still running about 17-18lbs of boost. Sry for the wrong information everybody. i guess i was getting a little excited for sledding and wasnt paying attention.

New Price 13,600.
 
S

SNOW JW

Well-known member
Nov 26, 2007
3,066
220
63
Belgrade MT
www.coderedperformance.com
He will need to fax the paperwork into the boarder 72hrs before the boarder cross all paperwork would need to be finished and then most times a call to make sure the boarder is fine with the paperwork that was sent. Also a recall letter is needed to make sure all recalls have been done this is easy to get though. Not hard to do but it has to be done right for a clean transfer into the boarder.
 
Premium Features