• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

09 M1000/CF1000 service bulletin

0
Mar 25, 2008
78
1
8
BC
I had this done in the middle of last season... This is what it looked like before i got these heat shields... sled is stock, i was quite unimpressed.

P3190039.jpg
 
0
Apr 21, 2008
419
21
18
For the 2008 m1000 there was an update for the ECU last spring. Was there any timing curve change? I didnt get it done because i finally got my boondocker tuned correctly and didnt want to have to re tune it. What are peoples findings that did the reflash? Did it help or did it just make the machine more environmentaly friendly sacrificing power? I heard made the sled richer bottom end. Whats the benefit?

I got my 08 done and my dad got his 07 done on the reflash last year, and it gave them both noticably more power and less loading up at low end and mid range. Only did 1 trip to the moutains and some running around home after the reflash, but no complaints at all.

I didn't have any melting issues with my 08, but I make sure to clean any snow off the hood right away so the screens are clear and air can flow through.
 

snowmanx

Well-known member
Premium Member
Aug 13, 2001
2,163
442
83
54
Polson, Montana
in my opinion dont do it it made it really rich on the bottom i had the 07 mapping and i miss it i did get it reflashed to an 08 map which works alright the big thing is not to hold it in the mid too long vary the throttle if you have the 07 map

Can't you have it remapped to 07?
 

RACINSTATION

Well-known member
Lifetime Membership
Jan 14, 2003
7,503
3,459
113
Idaho
Arctic Cat Service Bulletin #SB200904 or #SB200905 depending on 2007 or 2008 model. The dealer needs the CATT Tool and the heat shield update kit to do the trick.
 

Norway

Well-known member
Lifetime Membership
Nov 29, 2007
1,978
476
83
49
Arctic Cat Service Bulletin #SB200904 or #SB200905 depending on 2007 or 2008 model. The dealer needs the CATT Tool and the heat shield update kit to do the trick.

07/08?? Thread name says 09?

RS
 
H
Dec 31, 2008
2
0
1
56
in a house
09 M1000 heater

hate to bust in on the mapping Q&A but my 1000 also melted many parts including insulation blankets and some of the small tabs on the hood. the 2010 has different insulation, more tape, and a completely different heat shield around the oil bottle...awesome!

Injection bottle.jpg
 
Last edited:
R
Nov 28, 2007
81
6
8
57
Looking how close the spare drive belt is to the exhaust pipe and the damage heat has done to the oil caps maybe I will store this under the seat.
 
Premium Features