well, heres my new project...it wont be a money pit like my 900 hopefully...ok yeh right...
paid $1500 cash...throttle stuck wide open..sled wrecked into a tree...took the front out pretty bad...but i have as a roller already
heres the mods it already has on it
06 RMK 900..
153 Camoplast Maverick 2.25" track (SOLD)
3" Pitch Avid anti-rachets
225lb front track spring
Ryde fx FTS
Ryde fx rappid RTS
new hyfaxs (sold with rails)
black powdercoated skid (SOLD RAILS)
black powder coated tunnel (SOLD)
snowelimnaters
black dragon seat
dragon seat post
09 HOLZ spindles
Gripper skis
Timbersled center console vents (SOLD)
polaris under seat bag
6" fly risers (SOLD)
fly bars (SOLD)
MSD ignition plugs
SLP push arm
SLP torque arm
brandnew stator/flywheel and recoil housing
SLP billet Head
Diamond S hood (FOR SALE, BUT DAMAGED)
Avenger Race Pak
V-force3 reeds (SOLD, HAVE STOCK REEDS NOW)
new throttle body boots
SLP can (SOLD)
2 wheel kit from dragon with black OEM wheels (SOLD)
19/42 gearing
boondockers light resistor
06 SLP pipe
06 SLP y-pipe
extended FBF cable
MY parts i have already for it
Boondockers control box
Van Amburg Boondocker tunnel
I adjusted the TPS already
COMPFUSION front motor mounts
stock boost box
timbersled style intake
brandnew primary
74g MTX weights
09 front end conversion
09 sway bar
09 lower a-arms
09 IQ center console
(4) billet idler wheels
Summer to do
Camoplast Series IV, 2.52" pitch, 2.4" lug, 15 wide, 166" track
OEM 166 Rails
AVID Anti-Rachet Drivers 2.52" pitch
BOSS seat
stock gauges
timbersled gauge bracket
new TPS harness
fox floats front shock
custom rear motor mounts
balance primary
new clutching setup
.377/47 torsion springs
CPI stinger can
Polaris Anti-Vibe riser block
pro taper or rsi bars
rider select delete (the one and only POLZINHUNTER)
06 billet chaincase cover (if POLZINHUNTER takes the challenge )
fuel filter
billet front crossmember brace for the front motor mounts
either Mountain Fit IQR mod hood or the Mountain Fit IQ hood
summitseeker ice scratchers
Powermadd extended brake lever
anti-stab wheels
09 collant bottle
new jackshaft bearing
custom made lightweight jackshaft
SLP wave brake rotor
8 or 9" rear billet wheels
SLP White Exhaust Springs
port match/polish cylinders myself
black/white secondary spring with 66/44.46 helix with 2 derlin washer
flow test injectors/rebuild
VE front cooler
FTX rear torque arm relocation mod
ALL Mountain Fit Hoods Venting
AND POWDER COAT STUFF WITH AN ORANGE/BLACK COLOR SCHEME
see...thats all
paid $1500 cash...throttle stuck wide open..sled wrecked into a tree...took the front out pretty bad...but i have as a roller already
heres the mods it already has on it
06 RMK 900..
153 Camoplast Maverick 2.25" track (SOLD)
3" Pitch Avid anti-rachets
225lb front track spring
Ryde fx FTS
Ryde fx rappid RTS
new hyfaxs (sold with rails)
black powdercoated skid (SOLD RAILS)
black powder coated tunnel (SOLD)
snowelimnaters
black dragon seat
dragon seat post
09 HOLZ spindles
Gripper skis
Timbersled center console vents (SOLD)
polaris under seat bag
6" fly risers (SOLD)
fly bars (SOLD)
MSD ignition plugs
SLP push arm
SLP torque arm
brandnew stator/flywheel and recoil housing
SLP billet Head
Diamond S hood (FOR SALE, BUT DAMAGED)
Avenger Race Pak
V-force3 reeds (SOLD, HAVE STOCK REEDS NOW)
new throttle body boots
SLP can (SOLD)
2 wheel kit from dragon with black OEM wheels (SOLD)
19/42 gearing
boondockers light resistor
06 SLP pipe
06 SLP y-pipe
extended FBF cable
MY parts i have already for it
Boondockers control box
Van Amburg Boondocker tunnel
I adjusted the TPS already
COMPFUSION front motor mounts
stock boost box
timbersled style intake
brandnew primary
74g MTX weights
09 front end conversion
09 sway bar
09 lower a-arms
09 IQ center console
(4) billet idler wheels
Summer to do
Camoplast Series IV, 2.52" pitch, 2.4" lug, 15 wide, 166" track
OEM 166 Rails
AVID Anti-Rachet Drivers 2.52" pitch
BOSS seat
stock gauges
timbersled gauge bracket
new TPS harness
fox floats front shock
custom rear motor mounts
balance primary
new clutching setup
.377/47 torsion springs
CPI stinger can
Polaris Anti-Vibe riser block
pro taper or rsi bars
rider select delete (the one and only POLZINHUNTER)
06 billet chaincase cover (if POLZINHUNTER takes the challenge )
fuel filter
billet front crossmember brace for the front motor mounts
either Mountain Fit IQR mod hood or the Mountain Fit IQ hood
summitseeker ice scratchers
Powermadd extended brake lever
anti-stab wheels
09 collant bottle
new jackshaft bearing
custom made lightweight jackshaft
SLP wave brake rotor
8 or 9" rear billet wheels
SLP White Exhaust Springs
port match/polish cylinders myself
black/white secondary spring with 66/44.46 helix with 2 derlin washer
flow test injectors/rebuild
VE front cooler
FTX rear torque arm relocation mod
ALL Mountain Fit Hoods Venting
AND POWDER COAT STUFF WITH AN ORANGE/BLACK COLOR SCHEME
see...thats all
Last edited: