Just noticed my driver is pretty close to the edge of the track window. Anybody try aligning them while still on the sled by tapping with a mallet and 2x4 or similar?
Center Driver While on Sled
- Thread starter FriscoProx
- Start date
Small bottle Jack. Apply light pressure and tap.
I did the tapping method, go slowly, turn often to do it evenly... worked for me.
it only takes about 5min to remove the skid ,track and shaft and the same to put back in. My drivers were not centered from factory and it caused my track to run offset. Little easier to adjust driver with a press but the other method works too.
5 minutes huh? It takes me 5 minutes just to find the tools.
Yeah 5 minutes seems a little like nascar pit crew timing.
I was 4:58 last time.
Similar threads
