I just thought I would post this for information. About a month ago we had a firmware update that now gives us the ability to add or subtract fuel on the sled without a laptop. You can add or subtract 20% in LOW MED and HI settings. It is more of a fine tuning feature than a map building feature. Works great if you are running right on the edge and get somewhere and you need to add a bit or take a bit away to keep temps in check.
You will need the PCV and the LCD200 in order to have the ability to use this function. You will need to go to the Dynojet website if you currently have a PCV and download the latest firmware upgrade. Also, if you currently have and LCD200 you will need to do a firmware download for it as well.
You will need the PCV and the LCD200 in order to have the ability to use this function. You will need to go to the Dynojet website if you currently have a PCV and download the latest firmware upgrade. Also, if you currently have and LCD200 you will need to do a firmware download for it as well.
