D
I have a 2019 Polaris rmk pro 850 that a bearing in the crank sized up so I am rebuilding the engine. Today I received a rebuilt kit in the mail and noticed 2 of the bearings on the crank has a retaining ring around it which my previous crank did not have. After researching it I learned that in 2020 they added those rings and put a notch in the crank housing to keep the bearing in place. My engine does not have those small grooves to accommodate those retaining rings. I was wondering if I could just remove those rings and use loctite 603 to keep the bearing in place and use this new crank I just got if that would work fine or if I need to send back the crank and get a different one. Thank you!