I have a bunch of parts sitting around that need a new home.. Lots of parts to choose from..
Edge Console-$20
Pro X Console w/yellow screens-$20
Edge or Gen II gas tank. No cap-$20
Torsion Springs from an RMK 900-$20
RMK 900 Left and right aluminum side/bulk head cover-$25
RMK 900 water pump cover-$10
RMK 900 thermostat cover
2 RMK 6/7/800 ignition coils- $20 a piece
2 RMK thermostats-$5 a piece
IQR hood wiring harness-$30
RMK headlight switch. Not sure of condition-$5
02 RMK 700 CDI. Unknown mapping-$40
03 RMK 800 CDI. Unknown mapping. Says Mod on the back so dont think its stock. $40
600HO Polaris mod CDI and harness. Was used on an IQR-$100
06 RMK/Switchback 600 regulator- $20
Plastic pull rope handle-$5
Primer for any carb'd sled-$10
Orange Chrome Sportech hand guards. Billet mounts. Hand guards are cracked, but still work fine. -$15
3 Black wheels for an IQ rear axle-$5 a piece
1 Silver wheel for an IQ rear axle-$5
2 Red wheels for an IQ rear axle-$5 a piece
2 Red bogey wheels for a Gen II or Edge I believe. Includes mounts-$10
2 bogey wheel mounts for an IQ skid-$10
3 upper idler wheels for an IQ skid-$10
76 link chaincase chain from an IQR. 3/4 wide-$35
39T IQ/IQR bottom chaincase gear-$20
Everything is in good shape unless otherwise noted. Prices are negotiable so dont be afraid to offer.. Lets get these parts gone..
Edge Console-$20
Pro X Console w/yellow screens-$20
Edge or Gen II gas tank. No cap-$20
Torsion Springs from an RMK 900-$20
RMK 900 Left and right aluminum side/bulk head cover-$25
RMK 900 water pump cover-$10
RMK 900 thermostat cover
2 RMK 6/7/800 ignition coils- $20 a piece
2 RMK thermostats-$5 a piece
IQR hood wiring harness-$30
RMK headlight switch. Not sure of condition-$5
02 RMK 700 CDI. Unknown mapping-$40
03 RMK 800 CDI. Unknown mapping. Says Mod on the back so dont think its stock. $40
600HO Polaris mod CDI and harness. Was used on an IQR-$100
06 RMK/Switchback 600 regulator- $20
Plastic pull rope handle-$5
Primer for any carb'd sled-$10
Orange Chrome Sportech hand guards. Billet mounts. Hand guards are cracked, but still work fine. -$15
3 Black wheels for an IQ rear axle-$5 a piece
1 Silver wheel for an IQ rear axle-$5
2 Red wheels for an IQ rear axle-$5 a piece
2 Red bogey wheels for a Gen II or Edge I believe. Includes mounts-$10
2 bogey wheel mounts for an IQ skid-$10
3 upper idler wheels for an IQ skid-$10
76 link chaincase chain from an IQR. 3/4 wide-$35
39T IQ/IQR bottom chaincase gear-$20
Everything is in good shape unless otherwise noted. Prices are negotiable so dont be afraid to offer.. Lets get these parts gone..
