filter

Hi guys, I wanted to share my creation for my pro, I thought no way am I paying how much they want for another fuel filter, so what I did was removed the factory line, used a hand saw and Carefully cut the crimps off each end, just enough to get them to release. Then I removed the elbow into...

SPI part # SM-07136 WPS # 12-1161 Still in the bag. $30. https://forwardpowersports.com/index.php/snowmobile/engine/spi-fuel-filter-hose-assembly-sm-07136.html Call/ text (541) nine13 - 8three4zero

I am in the process of troubleshooting a wot bog at 7500 that brings me back to a standstill, and a occasional hanging idle. Motor and clutches have only 200 miles since rebuild this summer by big John and has been running strong on previous rides. I decided to check fuel pressure, carbs off and...

How do you tell when the bearings and seals in the center of the turbo are worn out? I have a 2009 boondocker TM8 with 4000mi running 10-12 psi and am just curious if this is something I need to consider replacing this summer. Sled is running well, but i can feel a slight amount of play on the...

so i installed a new oil filter in my 04 rev summit 800 and i keep bleeding the oil pump with the 8mm nut located at the front of the pump....there is a lil bit of air that will not come out of the filter...i premixed the gas at like a 50:1 just in case but dont want to run the sled with that...