i have a jacobson rollover valve and tether can the whole kill switch and wiring be removed when i install it last year while half way up a climb a branch hit the kill switch:face lucky me could have been really bad
Rate this post: |
Members of SnoWest Snowmobile Forum have rated post 3184801 as the most helpful. Skip right to it!
Currently:
If you can't fix it with
a hammer, it must be an
electrical problem.
Join Date: Jan 2010
Location: WY
Posts: 900
Thanks: 298
Thanked 187 Times in 120 Posts
Rep Power: 21474840
I have the OFT one, and it came with a loop that you can put in to disable the kill switch. It supposed to be for testing (wink) but I have it installed.
I hate bumping the kill switch in the worst time, so I just rely on the tether. Some people wrap a rubberband around the switch to make it that you have to hold it down to kill it, bumping will just make it stumble and come back on.
__________________ 07 Apex MTN - Not Stock
08 Nytro MTX - Bone Stock
kill switch removal
:face
lucky me could have been really bad
"Nytrocity" 2010 Yamaha Nytro SE
You Must be a registered member and logged in to view this response.
TNytro
YZ250F
Linear Mode
