P
what is the best set up clutching wise for 6000-12000 ft right now im running 58 primary weights with stock helix just doesnt feel like it pulls hard
set ups
- Thread starter poledge800
- Start date
P
its a 2009 dragon with 163 track and a hps can and some vents
G
Call Carl's cycle and get their helix. Install it on the 60 40 40 profile. I have the exact same sled as yours I ride 9K to 13K it pulls 8K to 8300K running 58 weights in the primary as well it pulls those rpm's depending on the snow conditions. And it has been dead on since the helix install. With the stock helix I was only pulling 7600 to 7800. I still have the stock primary and secondary springs as well. There are a bunch of clutching threads on the dragon on here as well. Everyone kind of has their own tricks when it comes to clutching and so forth also a new belt helps.
G
G
I have the same sled also but i have 10-60 weights stock springs and helix mine will pull 8250 to 8400-- 4500 to 8500 feet. Just purchased a PC5 from dyno tech and i can't wait. My sled fills like it can pull alot harder and i hope the PC5 will do it.:face-icon-small-coo
P
ya same here just bought a boondocker box and 02 just need to install and hopefully it will run well
C
clutching
What reflash are you running mine will only pull 7900-8050 do you think 60 gram wieghts in the primary will help. I'm running the reflash tha came with the engine upgrade. thanks
What reflash are you running mine will only pull 7900-8050 do you think 60 gram wieghts in the primary will help. I'm running the reflash tha came with the engine upgrade. thanks
