B
I would like to start a post of sutups on the 600 ho engine in iqr chassis with pipes or p
06 ho engine in 07 iqr with factory twin pipes and a cut head.
I ride 7,500-9,500 feet
this is my setup, (not very good)
270 mains (plugs look great) 38mm rack carbs
50 pilots
130-330 primary spring
10-56 wight
old button drivin clutch R12 helix
136 x 2in track
geared for 80 mph at 8500 rpm
right now the bottom end and mid range is great but it will only turn 8,100rpm for a second and then go down to 7,500 rpm
Im going to put 10-54s in it and the team roller clutch back on.
i ran out of cdi boxes so i have a 2003 prox 700 box on it.
06 ho engine in 07 iqr with factory twin pipes and a cut head.
I ride 7,500-9,500 feet
this is my setup, (not very good)
270 mains (plugs look great) 38mm rack carbs
50 pilots
130-330 primary spring
10-56 wight
old button drivin clutch R12 helix
136 x 2in track
geared for 80 mph at 8500 rpm
right now the bottom end and mid range is great but it will only turn 8,100rpm for a second and then go down to 7,500 rpm
Im going to put 10-54s in it and the team roller clutch back on.
i ran out of cdi boxes so i have a 2003 prox 700 box on it.
