T
So what are the options and what are the differances between them? TIA
Light Weight Battery??
- Thread starter TApeX_07
- Start date
R
YTZ10S $43 7# 200 CCA (drop 8# from stock battery)
YTZ7S $35 4.6# 140 CCA (drop 10# from stock battery)
These are prices on some knock-off brands.
I went w/ a Motocross brand (which is apparently made by YUASA).
http://www.tristatebattery.com/product_info.php?products_id=760
The website also has the 10S for ~107$.
Check ebay for the cheapo, knock off brands.
I personally run the 7s, with good success rate thus far. I do try to keep a Tender on it whenever possible though.
YTZ7S $35 4.6# 140 CCA (drop 10# from stock battery)
These are prices on some knock-off brands.
I went w/ a Motocross brand (which is apparently made by YUASA).
http://www.tristatebattery.com/product_info.php?products_id=760
The website also has the 10S for ~107$.
Check ebay for the cheapo, knock off brands.
I personally run the 7s, with good success rate thus far. I do try to keep a Tender on it whenever possible though.
I use 7S on 3 sleds......work fine.
RS
RS
U
Do they fit in the same bracket or do you have to modify it.
The 7s is quite a bit smaller then stock. Bracket needs to be modified.
how does the 7s hold up for apex's? its not uncommon for me to go riding when its below -25*C
D
what kind of modification are we talking about?
just need to make a smaller battery box. or you can buy the kit from cr racing
R
The 7s is light enough to just velcro in place. Its held up so far anyway. 
Get some strips of adhesive velcro. Apply to back side and bottom.
When/if that fails...well, theres always duct tape...
Get some strips of adhesive velcro. Apply to back side and bottom.
When/if that fails...well, theres always duct tape...
