R
2005 Summit X Rev
Sled Head Racing (Big John) 840 HO big bore [~$1800]
- porting
- 14.7:1 RKT head
- newer style pistons (NOT Weiscos)
- freshly built top end 11/2008
Coated stock pipe [~$85]
HPS can [$275]
Boysen RAD valves (reed cages & reeds) [$245]
SLP air intake / vent kit [~$85]
Custom venting [~$25]
Sock prefilter for airbox intake [~$15]
Boss high-rise seat w/ LED & pouch [$573]
Mahler 9.25" risers [$130]
Mountain Machine's 8" billets & bwk (setup w/ 2 wheels) [$447.80]
LED tail/brake light on bumper [~$40]
151x16x2.3 Camo Challenger track (new 1/15/2008) [$620]
Holz Scratchers [~$55]
Rail reinforcement kit [~$40]
Runningboard reinforcement kit [~$87]
Skid plate [~$80]
Doo gas can & straps
Quick Clickers [~$50]
9 tooth extros
19/45 gears
no swaybar
~$4,800 in mods/extras alone.
Well cared for. I have greased and changed chain case oil each season.
Always trailered in an enclosed trailer.
3360 miles (~80 hours) on chassis, ~200 miles on track, ~50 miles on top end (engine)
$6,500 USD
Located in Lakewood (west Denver) Colorado. Willing to meet half way if reasonable...or near snow.
Some extras I'm willing to add (or leave on) for extra $ [firm on price], otherwise will remove and install stock parts.
$300 - Dialed-in Team secondary (light weight) TSS04 (works great with current primary setup)
$350 - Digitron EGT guage (4 window, 2 EGT, 1 water, 1 RPM)
$7,150 USD WITH Digitron guage and Team 2ndary.
Mileage and hours
http://i27.photobucket.com/albums/c158/rotax7/001Other/rev fs/1080h05m.jpg
http://i27.photobucket.com/albums/c158/rotax7/001Other/rev fs/113360miles.jpg
EGT setup, riser, venting
http://i27.photobucket.com/albums/c158/rotax7/07-03-30 Rev Digitron Gauge/01_digitron_guage.jpg
Meshed hood vents, and head light holes
http://i27.photobucket.com/albums/c...s Meshed/002headlightholesmeshedinstalled.jpg
Sled Head Racing (Big John) 840 HO big bore [~$1800]
- porting
- 14.7:1 RKT head
- newer style pistons (NOT Weiscos)
- freshly built top end 11/2008
Coated stock pipe [~$85]
HPS can [$275]
Boysen RAD valves (reed cages & reeds) [$245]
SLP air intake / vent kit [~$85]
Custom venting [~$25]
Sock prefilter for airbox intake [~$15]
Boss high-rise seat w/ LED & pouch [$573]
Mahler 9.25" risers [$130]
Mountain Machine's 8" billets & bwk (setup w/ 2 wheels) [$447.80]
LED tail/brake light on bumper [~$40]
151x16x2.3 Camo Challenger track (new 1/15/2008) [$620]
Holz Scratchers [~$55]
Rail reinforcement kit [~$40]
Runningboard reinforcement kit [~$87]
Skid plate [~$80]
Doo gas can & straps
Quick Clickers [~$50]
9 tooth extros
19/45 gears
no swaybar
~$4,800 in mods/extras alone.
Well cared for. I have greased and changed chain case oil each season.
Always trailered in an enclosed trailer.
3360 miles (~80 hours) on chassis, ~200 miles on track, ~50 miles on top end (engine)
$6,500 USD
Located in Lakewood (west Denver) Colorado. Willing to meet half way if reasonable...or near snow.
Some extras I'm willing to add (or leave on) for extra $ [firm on price], otherwise will remove and install stock parts.
$300 - Dialed-in Team secondary (light weight) TSS04 (works great with current primary setup)
$350 - Digitron EGT guage (4 window, 2 EGT, 1 water, 1 RPM)
$7,150 USD WITH Digitron guage and Team 2ndary.
Mileage and hours
http://i27.photobucket.com/albums/c158/rotax7/001Other/rev fs/1080h05m.jpg
http://i27.photobucket.com/albums/c158/rotax7/001Other/rev fs/113360miles.jpg
EGT setup, riser, venting
http://i27.photobucket.com/albums/c158/rotax7/07-03-30 Rev Digitron Gauge/01_digitron_guage.jpg
Meshed hood vents, and head light holes
http://i27.photobucket.com/albums/c...s Meshed/002headlightholesmeshedinstalled.jpg
Last edited:
